Precision Steam Systems, Engineered.

Fabco Engineers builds and maintains the steam systems that keep Bangalore’s factories running. From a single feed water pump to a complete boiler house, we handle the engineering, the fabrication, the erection and the paperwork that comes with it.

We are a boiler and steam engineering firm based in S. Bingipura, on the southern edge of Bengaluru. Our crews work across Karnataka in dairies, breweries, pharmaceutical units, textile processing houses and food plants. If it carries steam, generates it, supports it or insulates it, we have probably built one.

Why plants across Karnataka call us first

Most firms offering industrial engineering services Bangalore wide will either supply equipment or install it. We do both, and we stay on afterwards. That continuity matters when a boiler trips at two in the morning during a production run.

Our work is IBR compliant where the regulation demands it. We prepare and submit the drawings, coordinate the inspections and hand over a plant that passes on the first visit. Clients who have dealt with rejected submissions before tend to notice the difference.

We have supplied and commissioned Hitze boilers, built high pressure steam headers, fabricated structural platforms and clad kilometres of pipework in hot and cold insulation. The same team that engineers a job usually erects it, so nothing gets lost between the drawing and the site.

Who we work for

Parle, Althera, Cothas Coffee, Akshaya Patra, Micro Labs, VH Group, Arvind Fashions, Pioneer Laundry and Swastiks have all put their plants in our hands. These are the plants that shaped how we deliver industrial engineering services Bangalore operators can depend on. Food and pharma clients bring the tightest hygiene and documentation demands. Laundries and textile units bring the hardest duty cycles. Both keep us honest.

What we actually do

IBR and Non IBR boilers. Supply, installation and commissioning of oil fired, gas fired, biomass and solid fuel steam generation systems, sized to your actual load rather than a catalogue number.

Steam piping systems. Design, fabrication and installation of high pressure steam lines, headers, traps and condensate recovery. Correct pipe sizing and trap selection is where most plants quietly lose money.

Structural fabrication. Steel platforms, boiler supports, walkways and equipment frames, fabricated to drawing and erected on site.

Industrial insulation. Hot and cold insulation with aluminium or GI cladding on boilers, headers, valves and process vessels. Properly lagged pipework pays for itself in fuel within a season.

Erection and servicing. Alignment, installation and overhaul of boilers, pumps, blowers and auxiliaries, including shutdown work planned around your production calendar.

Turnkey projects and AMC. Full boiler house projects from foundation to first steam, plus annual maintenance contracts with defined response times.

Because we offer the full range of industrial engineering services Bangalore manufacturers need, you deal with one accountable contractor rather than coordinating four.

Engineering that respects the plant it sits in

A boiler house is not a greenfield exercise. It sits in a live factory with fixed floor space, existing headers, an electrical supply that may already be stretched, and a production schedule nobody wants to disturb. Our surveys start with those constraints, not with a standard layout.

That approach shows up in small decisions. Running a header at the right gradient so condensate drains where you want it. Placing a blowdown valve where an operator can reach it safely. Sizing an economiser so it actually recovers heat rather than fouling in six months. These are the details that separate a plant that runs from one that is constantly attended to.

Safety and compliance are not paperwork exercises either. Pressure parts get tested. Welds get inspected. Documentation is complete before we ask for a signature. Our people work in operating factories, often alongside your staff, and they behave accordingly.

Fuel, efficiency and the cost of doing nothing

Steam is usually one of the largest line items in a plant’s energy bill, and most of the waste is invisible. Uninsulated valves, failed traps, oversized boilers cycling on and off, condensate going to drain instead of back to the feed tank. None of it announces itself.

We survey existing installations and quantify what those losses are worth annually. Sometimes the answer is a full replacement. More often it is trap replacement, better insulation and a condensate recovery line, at a fraction of the cost. We will tell you which, even when the smaller job is the one that suits us less.

For plants running biomass or solid fuel, fuel handling and ash removal deserve as much design attention as the boiler. Poorly designed feed systems cause more unplanned downtime than pressure parts do.

Working with Fabco Engineers

Every enquiry starts with a site visit. We look at your load pattern, your fuel, your available space and your compliance position, then quote against that. No engineering charge for the assessment.

During execution you get one point of contact who knows the job. Our supervisors are on site, not managing by phone. For AMC clients we hold a service history for every machine, so whoever attends already knows what was last done and what was flagged.

Spares for common wear items are held locally. For a plant that loses lakhs per shift when steam stops, the difference between a part in Bengaluru and a part being freighted matters more than the price of the part.

As providers of complete industrial engineering services Bangalore businesses rely on, we would rather build a relationship over years than win one order. Most of our work now comes from clients we first attended for an emergency callout.

Coverage across Karnataka

We deliver industrial engineering services Bangalore wide from our base in S. Bingipura, which puts us within reach of Bommasandra, Jigani, Attibele, Hosur Road, Electronic City, Peenya and the wider Bengaluru industrial belt. We take projects across Karnataka and into neighbouring districts where the scope justifies the travel.

Speak to an engineer

Tell us what you are running, what it is costing you and what is not working. If we are the right firm for it we will say so, and if you would be better served by a specialist elsewhere we will say that too. For dependable industrial engineering services Bangalore plants can plan around, call Fabco Engineers or send your requirement through the enquiry form and we will respond with something specific rather than a brochure.